Midlothian, Texas's Home for Water Softeners, Water Filters,
& Water Delivery

Midlothian’s tap water is treated to meet drinking water requirements, but trace contaminants, minerals, chloramines, and treatment-related byproducts can still be present. That is one reason many homeowners choose water filtration for better taste, added confidence, and extra protection at the tap.

Midlothian uses surface water, including water from Joe Pool Lake and purchased surface water from Tarrant Regional Water District, with Richland Chambers Lake listed in the source water information. Surface water can be affected by runoff, organic material, seasonal changes, and reservoir conditions, which is why many homeowners choose in-home testing and filtration.

Midlothian reported total chloramines as its disinfectant residual, with an average level of 3.25 ppm and a detected range of 3.01 to 3.4 ppm. Chloramines help control microbes in the water system, but they can also create a chemical taste or smell. A properly selected carbon filtration system can help reduce disinfectant taste and odor throughout the home.

Yes. Midlothian testing reported Total Haloacetic Acids (HAA5) as high as 28 ppb and Total Trihalomethanes (TTHM) as high as 37 ppb. These byproducts can form when disinfectants react with organic material in surface water. Many homeowners choose whole-house carbon filtration to help reduce unwanted tastes, odors, and treatment-related byproducts before water reaches the tap.

Testing detected several regulated contaminants in Midlothian water, including atrazine at 0.2 ppb, barium at 0.053 ppm, cyanide at 20.9 ppb, dibromochloromethane at 9.48 µg/L, fluoride at 0.278 ppm, nickel at 0.0016 mg/L, nitrate at 0.505 ppm, simazine at 0.081 ppb, lead at a 90th percentile level of 1.68 ppb, and copper at a 90th percentile level of 0.341 ppm. These results help show why in-home water treatment can still be valuable for homeowners who want more control over their drinking water.

Lead was reported at a 90th percentile level of 1.68 ppb, and copper was reported at a 90th percentile level of 0.341 ppm. The report listed 0 sites over the action level for both lead and copper. Lead and copper can still enter water through household plumbing, fixtures, and service lines, especially in older homes, which is why testing at the tap can be helpful.

Yes. Midlothian reported cyanide at 20.9 ppb. Cyanide is not a contaminant most homeowners expect to see in a water quality report, so it may be worth discussing during a local water test. A reverse osmosis drinking water system can help reduce many dissolved contaminants used for drinking, cooking, coffee, and ice.

Yes. Midlothian reported atrazine at 0.2 ppb and simazine at 0.081 ppb. These are herbicide-related contaminants that can appear in surface water. Homeowners who want added protection for drinking water may want to consider reverse osmosis or another properly selected filtration system.

Midlothian reported Total Organic Carbon (TOC) at a highest value of 6.73 ppm, with a range of 2.45 to 6.73 ppm. Organic material matters because it can react with disinfectants and contribute to disinfection byproducts. Whole-house carbon filtration can help improve taste and reduce certain organic-related water quality concerns.

PFAS test results were not listed in the Midlothian water quality information provided. That does not mean homeowners are not concerned about PFAS. Testing requirements and water quality priorities can change, and many families choose advanced filtration, such as reverse osmosis, for added protection against a wider range of potential contaminants.

Hardness levels were not listed in the Midlothian water quality information provided. However, many homeowners still notice signs of hard water at the home level, such as spots on dishes, buildup around fixtures, dry-feeling skin, or soap that does not lather well. A local water test can show whether a water softener would be helpful for your specific home.

Many Midlothian homeowners can benefit from a water filter, especially if they want to reduce chloramine taste, disinfection byproducts, trace contaminants, cyanide, herbicide-related contaminants, or issues tied to surface water conditions. A local water test can help determine whether a whole-house filter, reverse osmosis system, water softener, or combination system makes the most sense for your home.

You can access Midlothian’s Water Quality Report here.